Swiss Things combines two true-bypass Flexi-Switch enabled effects loops, a Flexi-Switch AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.

Features
 
Use as many pedals as you'd like without tone-suck

Quickly and easily bypass or engage all of your effects with one click

Use Flexi-Switch Technology with every pedal in your setup

Eliminate volume pedal tone-suck by using any expression pedal to control volume

Use multiple amps without phase issues, ground loops, or extra noise

Tidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location

Specs

Measures: 4.75″ x 5.65″ x 2.25″ with knobs
Current Draw: 40mA
Input Impedance: 1M Ohm
Output Impedance: 1K Ohm
Power: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. EarthQuaker Devices always recommends pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages.